LON & SUR
24/7
All Advice
Heating

Why Is My Heating Bill So High? Finding the Real Causes

The CS Services Heating Team19 November 2026 8 min read
Why Is My Heating Bill So High? Finding the Real Causes

When heating costs rise, it is easy to assume the tariff is the whole problem. In many homes across London and Surrey, though, the bill is also being pushed up by faults, poor control settings or heat escaping from the building faster than it should.

The useful starting point is to separate what you cannot change quickly, such as the unit price of gas, from what you can. If your usage has crept up without a clear reason, or some rooms never feel properly warm, there is usually a cause worth investigating.

This guide looks at the most common reasons for high heating bills, what you can check safely yourself, and when it makes sense to bring in a heating engineer. Heating support from CS Services is launching shortly, and enquiries are welcome ahead of launch.

Start by separating tariff pain from wasted heat

Before looking for faults, compare your recent bills with the same period last year if you can. A higher bill may be partly down to changed energy prices, colder weather, more time spent at home or a new occupant pattern rather than a sudden boiler problem.

What matters is whether your consumption has increased as well as the price. If the heating seems to run for longer, rooms take more time to warm up, or hot water performance has changed, that points to inefficiency somewhere in the system or the building.

In London and Surrey, older terraces, converted flats and period houses often make this harder to judge because they can lose heat unevenly. One room may overheat while another stays cold, leading people to turn the thermostat up and run the system longer than necessary.

System faults that quietly burn money

Not every heating fault causes a complete breakdown. Many simply make the system work harder for the same result, which is why bills rise before owners realise there is a technical issue.

One common sign is uneven heating. If some radiators stay cool at the top, need frequent bleeding or never seem fully hot, trapped air or circulation problems may be reducing efficiency. If radiators are cold at the bottom, sludge build-up may be restricting heat output.

Boiler pressure problems can also waste energy. Low pressure can affect circulation and performance, while repeated pressure loss may point to a leak or a failed component that needs proper diagnosis. Short cycling, where the boiler fires up and switches off too often, is another warning sign because it can mean the system is not running as it should.

Hard water is a local factor in many parts of London and Surrey. In heating and hot water systems, limescale can reduce efficiency over time, especially where components are already older. You may notice poorer hot water response, more noise from the boiler or a general drop in performance.

  • Watch for radiators that heat unevenly or take far longer than usual to warm up
  • Take note of any new boiler noises such as kettling, banging or repeated clicking
  • Check whether the boiler pressure keeps dropping rather than needing only an occasional top-up
  • Notice if the boiler turns on and off repeatedly without reaching a steady run
  • Look for small leaks around radiators, valves or pipework, especially in cupboards and under floors

Controls set wrong can cost more than people expect

A heating system can be in reasonable working order and still waste money if the controls are not set well. This is especially common after a power cut, battery change, boiler reset or home renovation, when programmers and thermostats end up running to the wrong schedule.

Start with the basics. Check the thermostat setting, the timed programme and whether the heating is coming on when nobody needs it. In houses with extensions, loft conversions or flat layouts split across levels, the thermostat position matters as well. If it is placed in a warm hallway or near another heat source, it may switch the system off too early or keep it running too long.

Thermostatic radiator valves can also work against you if used inconsistently. Turning some rooms fully up and then trying to control everything from one central thermostat often creates an uneven result that wastes energy and leaves people feeling colder than the bill suggests they should.

  • Set the programme around real occupancy rather than leaving long default heating periods in place
  • Lower the thermostat gradually if the house regularly overheats
  • Keep the area around the room thermostat clear so it reads the space properly
  • Use thermostatic radiator valves to reduce heat in spare rooms rather than overheating the whole house
  • Replace thermostat batteries if readings or schedules seem unreliable

The fabric of the house may be the main problem

If the boiler and controls are broadly sound, the next question is how quickly your home loses heat. A well-run system still becomes expensive when warm air escapes through gaps, cold surfaces and poorly insulated parts of the building.

This is a familiar issue in London and Surrey housing stock. Period properties can have solid walls, suspended timber floors and older sash or casement windows that leak heat. Terraced homes may perform differently from room to room depending on which walls are exposed. Flat conversions can have added complications from pipe runs, uninsulated voids and varying standards of past refurbishment.

You can often spot fabric issues without specialist tools. Cold draughts around window frames, chilly floors, rooms that cool down rapidly after the heating goes off, and condensation on colder walls or glazing all suggest heat loss. In smaller homes, even a frequently opened back door to a compact garden can have a noticeable effect if the kitchen or rear reception room is already hard to heat.

  • Check for obvious draughts around doors, loft hatches, skirting lines and window frames
  • Make sure curtains are not trapping heat behind radiators
  • Keep furniture away from radiators so warm air can circulate into the room
  • Use chimney balloons or other suitable draught measures in unused fireplaces where appropriate
  • If you have a loft, confirm insulation has not been disturbed or compressed by stored items

What you can do yourself and when to call a heating engineer

There are sensible homeowner checks that can help before you book professional support. You can review the heating schedule, bleed a radiator if you know how to do it safely, note boiler pressure readings, and look for visible leaks or persistent cold spots. Keeping a short record of symptoms is useful because intermittent faults are easier to diagnose when there is a pattern.

You should not remove boiler covers, interfere with gas appliances or try to dismantle controls and valves unless they are clearly designed for user adjustment. Gas and heating work should be handled by a Gas Safe registered engineer.

A heating engineer can help where there are repeated pressure issues, suspected sludge, poor circulation, control faults, persistent cold rooms, unusual boiler noises or signs of limescale-related inefficiency. In London and Surrey, practical access matters too. On-street parking restrictions, tight utility cupboards, concealed pipework in conversions and limited outdoor space around flues or condensate routes can all affect diagnosis, so it helps to describe the property layout when making an enquiry.

CS Services is launching heating shortly and welcomes enquiries ahead of launch. Heating work is charged from £140 per hour, with no call-out fee, a 1-hour minimum charge and time billed in 15-minute increments after the first hour. Annual boiler servicing is a fixed price of £130 excluding VAT rather than an hourly charge, and the price is agreed with the customer before work begins.

Key Takeaways

  • A higher heating bill is not always just the tariff; rising usage usually points to a practical cause.
  • Uneven radiators, pressure loss and boiler short cycling are common signs of wasted energy.
  • Poor thermostat and timer settings can add cost even when the system itself is sound.
  • Older London and Surrey homes often lose heat through draughts, weak insulation and uneven layouts.
  • Homeowners can do basic checks safely, but gas and heating repairs need a Gas Safe registered engineer.

Frequently Asked Questions

Why has my heating bill gone up when my routine has not changed?

Check whether the increase is only the energy price or whether your consumption has risen as well. If usage is up without a clear lifestyle change, look at system performance, control settings and heat loss from the building.

Can bleeding radiators reduce heating costs?

It can help if trapped air is stopping radiators heating properly. If you have to bleed them often, though, that can point to a wider issue in the system that needs professional attention.

Do old houses in London and Surrey usually cost more to heat?

They often do, especially period properties with solid walls, older windows, suspended floors and draughty details. The heating system may be fine, but the building can still lose heat quickly.

How do I know if limescale is affecting my heating system?

You may notice reduced efficiency, changes in hot water performance or unusual boiler noise. Hard water is common locally, so scale can be a contributing factor, particularly in older systems.

When should I call a heating engineer instead of adjusting things myself?

Call an engineer if the boiler pressure keeps dropping, radiators stay cold despite bleeding, the boiler short cycles, noises develop, or the house still heats poorly after you have checked the controls. Any gas-related work should be handled by a Gas Safe registered engineer.

Heating Across London & Surrey

Our engineers cover homes right across London and Surrey. Explore our heating service in these areas:

Need A Hand With The Real Thing?

Our certified, insured engineers cover London and Surrey. No call-out fees, card on completion and a 12-month guarantee on our work.