Decking often becomes one of the most hazardous surfaces in the garden through autumn and winter. A light film of algae, leaf tannins, traffic dirt and moisture can turn otherwise sound boards into a surface that feels fine in dry weather and treacherous in shade or rain.
That is especially common in London and Surrey gardens, where small plots, high boundary fencing, mature planting and north-facing layouts can leave decking damp for long periods. Period homes, terraced properties and flat conversions also tend to have tighter access, which can make regular deep cleaning harder to keep on top of.
The right approach depends on what the decking is made from. Timber and composite boards do not respond well to exactly the same cleaning methods, and using too much pressure or the wrong chemical can shorten the life of the surface rather than improve it.
Why decking gets slippery
Most slippery decking is not caused by rain alone. The main problem is biofilm: a thin layer of algae, mildew and grime that builds up where moisture sits and sunlight is limited. Add fallen leaves, planter runoff and pollution, and the surface quickly loses grip.
Early warning signs are easy to miss. Boards may look darker in patches, feel slick underfoot, stay wet longer than nearby paving or show green staining around edges and between grooves. In hard-water areas, mineral deposits can also trap dirt and leave a dull film that encourages further build-up.
- Shaded corners and spots under pots or furniture usually become slippery first
- Grooved boards often hold more dirt and moisture than smooth finishes
- Nearby trees, overhanging shrubs and blocked drainage all make the problem worse
- A small patch of algae can spread quickly once cooler weather sets in
How to clean timber decking without causing damage
Timber needs a careful, mechanical clean rather than a harsh one. Start by clearing furniture, pots and leaf litter, then sweep thoroughly so grit does not score the surface while you work. A bucket of warm water with a suitable decking cleaner and a stiff brush is often enough for routine maintenance.
Scrub along the grain, not across it, and pay attention to board gaps where moisture and debris collect. Rinse well but avoid saturating the deck more than necessary, especially if water tends to sit near thresholds or air bricks on older properties.
Pressure washers need caution. Used too aggressively, they can fur up softwood, strip surface fibres and leave the boards rougher and more absorbent than before. That roughened finish then holds more water and dirt, making the deck slippery again sooner.
- Check for raised fibres, splinters, cracked boards and loose fixings before cleaning
- Test any cleaning product on a small, less visible area first
- Avoid strong bleach mixes unless the product is specifically suitable for timber decking
- Do not direct high pressure into joints, against door thresholds or towards neighbouring walls
Looking after composite decking properly
Composite decking is often sold as lower maintenance, but it is not no-maintenance. It still collects algae, grime, food spills and leaf staining, particularly in narrow gardens with limited sun and airflow. Regular sweeping and prompt cleaning of debris make a noticeable difference.
Use a cleaner recommended for composite surfaces and a non-metallic brush. Many composite boards have a textured face designed to improve grip, but that texture also holds dirt if it is left too long. Gentle washing usually works better than trying to blast contamination out with excessive pressure.
Check the manufacturer's care guidance if you have it, especially for newer installations. Some composite products can mark, fade unevenly or lose their finish if cleaned with strong solvents, abrasive pads or very hot water.
- Lift planters and mats regularly so trapped moisture does not sit in one place
- Clean greasy barbecue marks sooner rather than later, as they can become stubborn
- Watch for mould around board edges, steps and balustrade bases
- If the deck adjoins bi-folds or a rear extension, take care not to force dirty water back towards the property
Oiling, sealing and routine maintenance
Timber decking may benefit from oiling or sealing, but only after it is fully clean and properly dry. Applying a finish over damp timber or residual algae traps problems in the surface and can lead to patchy results, poor adhesion and continued slipperiness.
The right product depends on the timber and the finish already on the deck. In general, oils soak in and help nourish the wood, while sealers form more of a protective barrier. Neither will compensate for loose boards, rotting subframes or poor drainage, so structural issues need dealing with first.
Composite boards are different. They are not usually oiled or sealed in the same way as timber, and using the wrong treatment can do more harm than good. For composite, routine cleaning, keeping gaps clear and reducing standing moisture are usually the priorities.
- Reinspect the deck after heavy rain to see where water pools
- Trim back planting to improve airflow and drying time
- Keep board gaps clear so water can escape properly
- Check steps, edges and handrails, as these are often the first places to become unsafe
What you can do yourself and when to call a professional
Most homeowners can manage regular sweeping, light washing and visual checks safely. That is usually enough to stop dirt and algae establishing if it is done consistently, particularly through autumn and early spring. Smaller London gardens often respond well to little-and-often upkeep because debris builds up quickly in confined spaces.
Professional help is worth considering when the deck is heavily contaminated, the surface remains slippery soon after cleaning, access is awkward or you are dealing with a larger area and want an even result. It also makes sense if the deck sits above drainage runs, next to delicate planting or close to painted masonry and glazed doors that could be affected by runoff or poor cleaning technique.
CS Services provides external cleaning across London and Surrey, with work quoted per job and agreed before work starts. If you are unsure whether your decking needs a careful clean, further surface treatment or repair work, getting it assessed early is usually the simplest way to avoid a more difficult job later.
Key Takeaways
- Slippery decking is usually caused by algae, grime and trapped moisture, not rain alone.
- Timber and composite decking should be cleaned differently.
- Overuse of a pressure washer can damage boards and make future slipping worse.
- Routine sweeping and early spot cleaning are the best prevention.
- Persistent slipperiness can point to drainage, shade or surface damage issues.
Frequently Asked Questions
Can I pressure wash my decking?
Sometimes, but carefully. Timber is easy to damage with too much pressure, and composite can also suffer if cleaned too aggressively. A gentler wash with the right cleaner is often safer and more effective.
How often should decking be cleaned?
Light maintenance such as sweeping should be regular, especially in autumn. A more thorough clean is usually needed when you notice dark patches, green growth, slippery areas or heavy debris build-up.
Should timber decking always be oiled after cleaning?
Not always, but many timber decks benefit from a suitable oil or sealer once they are fully dry. The important point is to clean properly first and choose a product that suits the timber and any existing finish.
Does composite decking need sealing?
Usually no. Composite boards are generally maintained through routine cleaning rather than oiling or sealing, and unsuitable treatments can cause problems.
When is professional cleaning the better option?
If the decking is very slippery, badly stained, awkward to access, close to the house or affected by drainage and standing water issues, professional cleaning is often the safer choice.



