Many London and Surrey homes lose heat through small gaps around doors, sash windows and timber frames. In period properties especially, the problem is often gradual movement, wear and poor past repairs rather than one obvious failure.
Good draught-proofing is not only about sticking on a seal and hoping for the best. The best results come from understanding where air is getting in, choosing the right materials and making sure the joinery still opens, closes and drains properly.
If you live in a Victorian or Edwardian terrace, a flat conversion, or any older property with timber windows and doors, a careful joinery approach can make rooms feel noticeably more comfortable without changing the character of the building.
Where draughts really get in
Most draughts are caused by movement at joints and openings, not by the glass itself. Common weak points include the meeting rails of sash windows, the edges of front and back doors, thresholds, letter plates, loft hatches and the gap between a frame and the surrounding wall.
In older London terraces and Surrey period homes, timber naturally expands and contracts over time. Layers of paint, previous patch repairs and minor settlement can all stop windows and doors sitting squarely, which leaves uneven gaps that let cold air through.
A simple first check is to feel around the frame on a windy day, especially at corners, locks and the bottom edge. You can also look for signs such as rattling sashes, visible daylight, curtains moving when windows are shut, or cold patches on the floor near a door.
- Check front doors that open directly onto the street, as they often take the worst weather.
- Inspect bay windows carefully, as small gaps around several joints can add up.
- In flat conversions, look at original windows alongside newer internal doors, which may have been fitted with less attention to sealing.
- Do not overlook service penetrations nearby, such as old pipe routes or cable holes around frames.
Seals, brushes and beading: choosing the right fix
Not every gap needs the same treatment. Compressible seals suit many hinged doors and casement windows, brush strips are often useful where parts need to slide past each other, and timber beading can help tidy and reduce larger, uneven gaps when fitted properly.
For a homeowner, the safe jobs are usually the simple ones: replacing a worn adhesive seal, fitting a brush letter plate cover, adding a door sweep, or tightening loose ironmongery so the door closes more firmly. These can make a clear difference if the joinery is basically sound.
Problems start when the frame is twisted, the sash is loose in its channel, or moisture damage has changed the timber. In those cases, adding thicker seals can make windows jam, trap moisture or stop locks engaging properly, so the underlying joinery needs attention first.
- Use seals that match the size of the gap rather than the thickest option available.
- Avoid blocking intentional drainage or ventilation paths, especially on windows.
- Replace perished putty, cracked paint and loose beads before expecting seals to work well.
- If a threshold is worn or the door has dropped, correcting the alignment usually matters more than adding extra strip seals.
Sash window options for period homes
Sash windows need a more careful approach because they rely on movement, balance and tight but even running lines. The most effective improvements often combine discreet draught-proofing with basic joinery repairs, such as easing sticking areas, securing loose staff beads or correcting excessive play in the sash.
If your sashes rattle in traffic or move in the wind, they may need new brush-pile carriers or replacement parting and staff beads designed for draught reduction. That tends to be more durable and neater than surface-applied foam strips, which can peel away and interfere with smooth operation.
Many homeowners are rightly concerned about preserving original features. A good repair-led approach can usually improve comfort while keeping the appearance of traditional timber windows, which matters in conservation-minded streets and older neighbourhoods across London and Surrey.
- You can safely clear paint build-up from obvious contact points only if you do it gently and avoid damaging the frame.
- Do not force a sticking sash, as that can crack glazing, strain cords or damage joints.
- If cords, weights or catches are faulty, it is better to have the mechanism checked properly.
- Secondary glazing may be worth considering where noise and heat loss are both problems, especially on busier roads.
What homeowners can do, and when a carpenter should step in
A sensible DIY starting point is inspection and maintenance. Keep drainage paths clear, replace obviously worn seals, tighten hinges, check catches pull the window or door in properly, and repaint exposed timber before moisture gets in and causes swelling or rot.
Call a professional when there is persistent movement, visible timber decay, loose joints, failed thresholds, dropped doors or sash windows that no longer run correctly. Those issues are not just about comfort; they can affect security, water ingress and the life of the joinery itself.
Local practicalities also matter. In London terraces and flat conversions, access can be tight and work may need careful planning around shared entrances, on-street parking and limited outside space. If replacement sections of timber or workshop-made components are needed, measuring and fitting accurately is the difference between a proper repair and a short-term patch.
What it saves in comfort and cost
Draught-proofing rarely transforms a cold house on its own, but it can make specific rooms feel far more stable and usable. You notice it most in bay-fronted living rooms, upstairs bedrooms with sash windows, and hallways where a front door leaks cold air straight through the house.
The cost benefit comes from reducing wasted heat and helping your heating system maintain a steady temperature with less effort. Even where bills do not change dramatically at once, improved comfort often means fewer cold spots, less need to overheat one room and less annoyance from rattles and movement.
For period-home owners, careful joinery repairs can also help avoid larger remedial work later. Keeping water out, preventing timber wear from getting worse and dealing with small alignment issues early is usually more practical than waiting until a door or window needs major rebuilding.
CS Services is currently taking enquiries ahead of the launch of its carpentry service. If you are unsure whether a draught problem needs simple sealing or more involved joinery repair, it is worth asking for advice before applying a quick fix that may not last.
Key Takeaways
- Most draughts come through gaps at joints, edges and moving parts, not through the glass alone.
- The right seal depends on how the door or window opens and how even the gap is.
- Sash windows usually need a repair-led approach, not just stick-on foam.
- DIY works for basic maintenance and simple seal replacement when the joinery is sound.
- If frames are warped, rotten, loose or badly aligned, professional carpentry is the better option.
Frequently Asked Questions
Can I draught-proof old sash windows myself?
You can do basic checks and minor maintenance, such as clearing paint build-up carefully and checking catches, but full draught-proofing is often more effective when beads and running lines are fitted properly. If the sash rattles, sticks badly or has faulty cords, it is better to have it assessed.
Are adhesive foam strips a good long-term fix?
They can help on some straightforward gaps, particularly on simple hinged openings, but they are rarely the best answer for worn or misaligned period joinery. If the frame is uneven, the result may be poor sealing, sticking or premature failure.
How do I know if a draught is a joinery problem or something else?
If the air movement is clearly around window or door edges, locks, meeting rails or thresholds, joinery is the likely cause. If the cold spot is around surrounding plaster, skirting or service entries, there may also be gaps in the building fabric that need separate attention.
Will draught-proofing affect ventilation?
It should reduce unwanted air leakage without blocking designed ventilation or drainage. That is why materials and placement matter, especially on windows, where closing the wrong gap can create condensation or operational problems.
Can CS Services carry out carpentry work now?
Carpentry is launching shortly and enquiries are welcome ahead of launch. CS Services covers London and Surrey, and can advise on whether a draught issue is likely to need joinery attention rather than a simple DIY seal replacement.



